Compare 
My Account 
The running outlet is designed to connect gutters and downpipes, in order to drain rain and melt water from the roof surfaces into the gutter system. Running outlet consists of a gutter sleeve (radius 130 mm) and a cylindrical pipe connected to it at an angle of 90 ° (diameter 100 mm), equipped with a seal, which is made of rigid PVC (PVC U). It is manufactured by casting method.
The seal is made of closed-cell EPDM rubber, which reliably seals the system connection.
Running Outlet 130 mm (RAINWAY 130) gray
0
The running outlet is designed to connect gutters and downpipes, in order to drain rain and melt water from the roof surfaces into the gutter system. Running outlet consists of a gutter sleeve (radius 130 mm) and a cylindrical pipe connected to it at an angle of 90 ° (diameter 100 mm), equipped with a seal, which is made of rigid PVC (PVC U). It is manufactured by casting method.
The seal is made of closed-cell EPDM rubber, which reliably seals the system connection.
| General characteristics | |
| system type | 130/100 mm |
| Material | PVC-U |
| Production technology | Founding |
| Quantity per package | 10 pieces |
| Size | |
| Length | 260 mm |
| The diameter running outlet | 130 mm |
| Weight | 0,370 kg |
| Dimensions | 260×152×223 mm |
| Additional characteristics | |
| Temperature of use | from - 40°С / to + 60°С |
| Installation temperature | from + 5°С |
| Resistance to UV radiation | Resistant |
| Warranty | 10 years |
| European standard | EN 607:2004 |
| Сertificate of conformity | Certified |
